> ## Documentation Index
> Fetch the complete documentation index at: https://c5tako.zipher.space/llms.txt
> Use this file to discover all available pages before exploring further.

# Notification

> Configure sound and status LED settings for C5TAKO™

This page helps you configure notification sounds and status LED

Menu path: `SETTINGS → Notification`

## 🔔 Sound and Light Settings

> [card] 🔇 Mute Buzzer
>
> Turn notification sound off or on
>
> Enable this option to mute all sounds

> [card] 💡 OFF LED
>
> Turn status LED off or on
>
> Enable this option to turn off the LED

> [card] 🔊 Test Buzzer
>
> Preview each sound pattern
>
> Select a sound to hear it before deciding

> [card] ✨ Test LED
>
> Test the status LED
>
> Check if the LED works normally

> [!NOTE]
>
> The terms `Mute` and `OFF` mean "disabled," so their wording may look opposite to the on-screen switch state

## 🎵 Available Sound Patterns for Testing

When you enter `Test Buzzer`, you'll find these sounds:

> [accordion] Basic Sounds
>
> * `Click` - Short click sound
> * `Soft Ping` - Soft ping sound
> * `Ready` - Ready sound
> * `Confirm` - Confirmation sound
> * `Success` - Success sound

> [accordion] Status Sounds
>
> * `Flipper Chirp` - Flipper's signature sound
> * `Mode Change` - Mode change sound
> * `Start Armed` - Start operation sound
> * `Stop Disarmed` - Stop operation sound
> * `Connected` - Connection sound
> * `Disconnected` - Disconnection sound

> [accordion] Warning Sounds
>
> * `Busy Locked` - System busy sound
> * `Denied` - Access denied sound
> * `Warning Soft` - Soft warning
> * `Warning Tactical` - Severe warning
> * `Error Normal` - Normal error sound
> * `Hard Fail` - Severe failure sound
> * `Low Battery` - Low battery warning
> * `Critical` - Critical alert

> [accordion] Operation Sounds
>
> * `Scan Tick` - Tick sound during scanning
> * `Capture Found` - Data captured sound

## 💡 Usage Tips

> [!TIP]
>
> **Quiet environment:** Enable `Mute Buzzer` to silence all sounds
>
> **Save battery:** Enable `OFF LED` to turn off the status light
>
> **Test before use:** Use `Test Buzzer` and `Test LED` to verify the device works properly

> [!NOTE]
>
> 🎬 **Media to add:** Demonstrate turning on/off Mute Buzzer, OFF LED, and testing sounds/lights

## ↩️ Back to Main

> [card] [SETTINGS](https://c5tako.zipher.space/en/features/settings.md)
>
> Return to see other settings


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.